Archive for the ‘trade shows’ Category

Greenbuild 2013 Photo Recap

November 26, 2013

Last week Team Bluebeam had a blast at Greenbuild 2013 in Philadelphia, PA. Not only did we enjoy demonstrating how Bluebeam Revu, with its integrated Bluebeam Studio and 3D PDF workflows, can help project teams go paperless, but we also got treated to a rockin’ concert by Jon Bon Jovi! It was too much fun not to share, so here’s a little taste of what went down.

photo

Welcome to Philly!

The Bluebeam booth in all its glory!

We had lots of great talks with attendees about going paperless with Revu.

Taking a break to enjoy one of the photo booths in the exhibit hall.

Lunch at DiNic’s in the Reading Terminal Market.

One of DiNic’s famous pulled pork sandwiches…YUM!

Getting ready for the Greenbuild Celebration.

Finishing the trip off with a tour of Independence Hall before heading home.

It’s Greenbuild Time!

November 20, 2013

We’re super excited to be in Philadelphia this week for the 2013 Greenbuild Conference and Expo. Most of the team arrived yesterday and took the opportunity to check out some of the fun dining options that Philly has to offer.

IMG_5400

Pre-conference dinner last night at Brauhaus Schmitz.

This morning, it was off to the Pennsylvania Convention Center to hit the exhibit hall, where we’ll be giving Revu demos, tips and tricks.

IMG_5402

Heading over to the Convention Center to get things started!

Not only are we looking forward to showing how Revu and Studio can help companies go green by reducing paper, but we’re also super excited that Bon Jovi will be there to get things rockin’ with a concert on Thursday night. Can’t wait!

Until next time,

Jenn

August 20, 2013

Virtual Green Expo

Bluebeam will be participating in the Virtual Green Expo, which starts tomorrow and runs through Thursday. This free online event leverages the power of a virtual trade show to present the latest trends on greening existing buildings, no travel required. Earn CEUs and hear from industry experts, including a keynote speech from the USGBC’s Doug Gatlin. We’ll be exhibiting in our virtual booth and would love to chat with you, so stop by and say hi! Oh, and did I mention it’s free? Register today.

Check Us Out at Dwell on Design

June 14, 2013

DOD_logo2013

Team Bluebeam is headed to Dwell on Design, our third year in a row! The show takes place at the Los Angeles Convention Center from June 21st – 23th. Stop by booth #623 to say hi and see how Revu can help you implement a paperless workflow on your next project. If you’d like more information on our other upcoming Bluebeam events, visit our events page.

Come See Us at the 2013 AIA National Convention

June 13, 2013

people-standing

Our Bluebeam road warriors are on the move again, and this time they’re headed to the Mile High City for the 2013 AIA National Convention. This year’s convention will be from June 20th-22nd at the Colorado Convention Center in Denver, CO. We’ll be at booth #1530, so come on by and say hello. We can’t wait to show you how Bluebeam Revu 11 and Bluebeam Studio can take your paperless workflows to a whole new level!

For more information on the AIA National Convention, click here. If you’re interested in learning about other upcoming Bluebeam events, visit our events page.

Catch Bluebeam at the ENR Global Construction Summit

May 28, 2013

GLOBAL_SUMMIT-2013

Next week, Bluebeam will be heading to the Big Apple for the ENR Global Construction Summit on June 6th and 7th. During this two-day summit, we’ll be showcasing Revu 11’s newest features to construction professionals from around the world. The summit, which will take place at the McGraw-Hill Companies Headquarters, will provide all attendees a chance to explore growth opportunities and investigate solutions to the most pressing challenges impacting the construction industry on a global level.

For more information on the ENR Global Construction Summit, click here. If you’re interested in learning about other upcoming Bluebeam events, visit our events page.

Cheers,

Kyle

Bluebeam to Participate in the Bentley LEARNing Conference

May 13, 2013

21135_10151344307017364_619557474_n

Team Bluebeam is hitting the road again. From May 13th through May 16th, we will be exhibiting at the Bentley LEARNing Conference at the Pennsylvania Convention Center in Philadelphia, PA. Stop by booth #9 to see Revu 11’s newest features, and for a demonstration of how Revu integrates with Projectwise® by allowing users to retrieve, markup and check-in documents directly from Revu’s interface. For complete details on what to expect at this year’s conference, click here.

Cheers,

Kyle

Bluebeam to Exhibit at BIM Show Live

April 25, 2013

BIMSHOWLIVE

Next week, Bluebeam is heading to Westminster, London to exhibit and network with the UK BIM community at BIM Show Live, a show dedicated to showcasing how architects, contractors, consultants and engineers are using new processes and technologies to leverage the potential of BIM.

Bluebeam will be on hand to show how project teams can use Revu’s 2D and 3D PDF creation and markup capabilities to share relevant BIM information to those downstream. Bluebeam will also be showing off some of Revu 11’s newest 3D features including the ability to convert IFC files to 3D PDFs and new 3D PDF viewing technology that project teams use to show how building elements fit together by isolating interior details of hard-to-reach models and manipulating individual objects.

BIM Show Live is taking place April 30th through May 1st at the Park Plaza Westminster Bridge Hotel. If you’ll be at the event, make sure to stop by stand P6 located in the Software Lounge to introduce yourself and see what’s new!

Cheers,

Kyle

Catch Bluebeam’s Debut at The Steel Show

April 17, 2013

The Steel Show

Starting today, Bluebeam will be exhibiting at the North American Steel Construction Conference – aka “The Steel Show.”

This is Bluebeam’s first time exhibiting at The Steel Show and the first chance for many show attendees, mostly structural engineers, to see Revu 11 in action. Come see how Revu 11 takes 3D PDF viewing to a whole new dimension by allowing you to convert IFC files to 3D PDFs, isolate interior details of hard-to-reach models with the Section Box tool, and manipulate individual objects with the Transform tool to communicate how assembly elements fit together.

The Steel Show is taking place April 17th through 19th at America’s Center Convention Complex in St. Louis, Missouri. If you’ll be at the event, make sure to stop by booth 1433 to introduce yourself and see what’s new!

Cheers,

Kyle

Bluebeam Participates in MCA Chicago’s Technology Day

February 7, 2013

tech-Banner

Today, Bluebeam will be speaking and exhibiting at the Mechanical Construction Association (MCA) Technology Day taking place from 7:30 am to 3:45 pm at the Burr Ridge Marriot in Chicago. Throughout this one-day summit featuring technologies impacting the construction industry, we’ll be talking all things Bluebeam Revu, and taking a closer look at how specialty contractors can utilize Revu to streamline workflows and enhance project communication.

Attendees can catch our speaking session in Salon II at 10:35 AM CT, where we will showcase how Revu can be used for project tracking, estimation, creating RFI’s, quality control punch lists and submittals. Then beginning at 11:30 AM CT, attendees can meet one on one with Bluebeam representatives during the tradeshow luncheon. So, if you’re attending the show or happen to be in the area, stop by and see us.

Cheers,

Kyle


%d bloggers like this: